Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | Nubs_Select | Posted: | May 3, 2024 23:08 | Subject: | Re: Missing stickered part from Set 7706 | Viewed: | 29 times | Topic: | Catalog | |
| In Catalog, Saitobricks.ca writes:
| In Catalog, Nubs_Select writes:
| In Catalog, Saitobricks.ca writes:
| In Catalog, Nubs_Select writes:
| In Catalog, Saitobricks.ca writes:
| In Catalog, Nubs_Select writes:
| In Catalog, Saitobricks.ca writes:
| In Catalog, TakeAbricK writes:
| In Catalog Requests, TheJerminator writes:
| I notice that the current inventory for Set 7706-1 Mobile Defense Tank is missing
the two white 2x2 round bricks with stickers from the sides of the vehicle. It
looks like the part does not currently have a catalog entry, either.
The stickers are applied on Page 31 of the instruction manual (Sticker 16, Step
22.3). I cannot add a catalog entry for these stickered parts myself because
I don't own the set or stickered parts.
|
Unortunately there's nothing a catalog admin can do about that. We just have
to wait untill someone who does own the stickered parts, to submit them to the
catalog and add them to the set inventory.
So I will move this post from Topic 'Catalog Request' to Topic 'Catalog'.
Diana
|
I am currently embarking on a journey to catalog all the stickered parts in my
collection, which should take about another year and a half.
|
a worthy goal!
|
One I am not looking forward to, but it needs sooo badly to be done.
Currently have over 100 city sets to do, and about 10 speed champions.
|
should I send you over my uncataloged stickered parts? i have a few containers
filled with them
|
Sure, I guess, how many do you have?
|
No idea it’s the leftovers of about 40-50 pounds of stickered parts I listed
|
Well if you are sending me them could you make list of the sets they came from
so I have a idea of what’s going on.
|
I have no idea what’s sets they are from, or even if they are on the right parts
I never had the time to go thru them (still don’t )
|
|
Author: | Saitobricks.ca | Posted: | May 3, 2024 23:05 | Subject: | Re: Missing stickered part from Set 7706 | Viewed: | 19 times | Topic: | Catalog | |
| In Catalog, Nubs_Select writes:
| In Catalog, Saitobricks.ca writes:
| In Catalog, Nubs_Select writes:
| In Catalog, Saitobricks.ca writes:
| In Catalog, Nubs_Select writes:
| In Catalog, Saitobricks.ca writes:
| In Catalog, TakeAbricK writes:
| In Catalog Requests, TheJerminator writes:
| I notice that the current inventory for Set 7706-1 Mobile Defense Tank is missing
the two white 2x2 round bricks with stickers from the sides of the vehicle. It
looks like the part does not currently have a catalog entry, either.
The stickers are applied on Page 31 of the instruction manual (Sticker 16, Step
22.3). I cannot add a catalog entry for these stickered parts myself because
I don't own the set or stickered parts.
|
Unortunately there's nothing a catalog admin can do about that. We just have
to wait untill someone who does own the stickered parts, to submit them to the
catalog and add them to the set inventory.
So I will move this post from Topic 'Catalog Request' to Topic 'Catalog'.
Diana
|
I am currently embarking on a journey to catalog all the stickered parts in my
collection, which should take about another year and a half.
|
a worthy goal!
|
One I am not looking forward to, but it needs sooo badly to be done.
Currently have over 100 city sets to do, and about 10 speed champions.
|
should I send you over my uncataloged stickered parts? i have a few containers
filled with them
|
Sure, I guess, how many do you have?
|
No idea it’s the leftovers of about 40-50 pounds of stickered parts I listed
|
Well if you are sending me them could you make list of the sets they came from
so I have a idea of what’s going on.
|
|
Author: | Nubs_Select | Posted: | May 3, 2024 23:03 | Subject: | Re: Missing stickered part from Set 7706 | Viewed: | 23 times | Topic: | Catalog | |
| In Catalog, Saitobricks.ca writes:
| In Catalog, Nubs_Select writes:
| In Catalog, Saitobricks.ca writes:
| In Catalog, Nubs_Select writes:
| In Catalog, Saitobricks.ca writes:
| In Catalog, TakeAbricK writes:
| In Catalog Requests, TheJerminator writes:
| I notice that the current inventory for Set 7706-1 Mobile Defense Tank is missing
the two white 2x2 round bricks with stickers from the sides of the vehicle. It
looks like the part does not currently have a catalog entry, either.
The stickers are applied on Page 31 of the instruction manual (Sticker 16, Step
22.3). I cannot add a catalog entry for these stickered parts myself because
I don't own the set or stickered parts.
|
Unortunately there's nothing a catalog admin can do about that. We just have
to wait untill someone who does own the stickered parts, to submit them to the
catalog and add them to the set inventory.
So I will move this post from Topic 'Catalog Request' to Topic 'Catalog'.
Diana
|
I am currently embarking on a journey to catalog all the stickered parts in my
collection, which should take about another year and a half.
|
a worthy goal!
|
One I am not looking forward to, but it needs sooo badly to be done.
Currently have over 100 city sets to do, and about 10 speed champions.
|
should I send you over my uncataloged stickered parts? i have a few containers
filled with them
|
Sure, I guess, how many do you have?
|
No idea it’s the leftovers of about 40-50 pounds of stickered parts I listed
|
|
Author: | Saitobricks.ca | Posted: | May 3, 2024 22:58 | Subject: | Re: Missing stickered part from Set 7706 | Viewed: | 22 times | Topic: | Catalog | |
| In Catalog, Nubs_Select writes:
| In Catalog, Saitobricks.ca writes:
| In Catalog, Nubs_Select writes:
| In Catalog, Saitobricks.ca writes:
| In Catalog, TakeAbricK writes:
| In Catalog Requests, TheJerminator writes:
| I notice that the current inventory for Set 7706-1 Mobile Defense Tank is missing
the two white 2x2 round bricks with stickers from the sides of the vehicle. It
looks like the part does not currently have a catalog entry, either.
The stickers are applied on Page 31 of the instruction manual (Sticker 16, Step
22.3). I cannot add a catalog entry for these stickered parts myself because
I don't own the set or stickered parts.
|
Unortunately there's nothing a catalog admin can do about that. We just have
to wait untill someone who does own the stickered parts, to submit them to the
catalog and add them to the set inventory.
So I will move this post from Topic 'Catalog Request' to Topic 'Catalog'.
Diana
|
I am currently embarking on a journey to catalog all the stickered parts in my
collection, which should take about another year and a half.
|
a worthy goal!
|
One I am not looking forward to, but it needs sooo badly to be done.
Currently have over 100 city sets to do, and about 10 speed champions.
|
should I send you over my uncataloged stickered parts? i have a few containers
filled with them
|
Sure, I guess, how many do you have?
|
|
Author: | Nubs_Select | Posted: | May 3, 2024 22:58 | Subject: | Re: Missing stickered part from Set 7706 | Viewed: | 23 times | Topic: | Catalog | |
| In Catalog, Saitobricks.ca writes:
| In Catalog, Nubs_Select writes:
| In Catalog, Saitobricks.ca writes:
| In Catalog, TakeAbricK writes:
| In Catalog Requests, TheJerminator writes:
| I notice that the current inventory for Set 7706-1 Mobile Defense Tank is missing
the two white 2x2 round bricks with stickers from the sides of the vehicle. It
looks like the part does not currently have a catalog entry, either.
The stickers are applied on Page 31 of the instruction manual (Sticker 16, Step
22.3). I cannot add a catalog entry for these stickered parts myself because
I don't own the set or stickered parts.
|
Unortunately there's nothing a catalog admin can do about that. We just have
to wait untill someone who does own the stickered parts, to submit them to the
catalog and add them to the set inventory.
So I will move this post from Topic 'Catalog Request' to Topic 'Catalog'.
Diana
|
I am currently embarking on a journey to catalog all the stickered parts in my
collection, which should take about another year and a half.
|
a worthy goal!
|
One I am not looking forward to, but it needs sooo badly to be done.
Currently have over 100 city sets to do, and about 10 speed champions.
|
should I send you over my uncataloged stickered parts? i have a few containers
filled with them
|
|
Author: | Saitobricks.ca | Posted: | May 3, 2024 22:57 | Subject: | Re: Missing stickered part from Set 7706 | Viewed: | 22 times | Topic: | Catalog | |
| In Catalog, Nubs_Select writes:
| In Catalog, Saitobricks.ca writes:
| In Catalog, TakeAbricK writes:
| In Catalog Requests, TheJerminator writes:
| I notice that the current inventory for Set 7706-1 Mobile Defense Tank is missing
the two white 2x2 round bricks with stickers from the sides of the vehicle. It
looks like the part does not currently have a catalog entry, either.
The stickers are applied on Page 31 of the instruction manual (Sticker 16, Step
22.3). I cannot add a catalog entry for these stickered parts myself because
I don't own the set or stickered parts.
|
Unortunately there's nothing a catalog admin can do about that. We just have
to wait untill someone who does own the stickered parts, to submit them to the
catalog and add them to the set inventory.
So I will move this post from Topic 'Catalog Request' to Topic 'Catalog'.
Diana
|
I am currently embarking on a journey to catalog all the stickered parts in my
collection, which should take about another year and a half.
|
a worthy goal!
|
One I am not looking forward to, but it needs sooo badly to be done.
Currently have over 100 city sets to do, and about 10 speed champions.
|
|
Author: | Nubs_Select | Posted: | May 3, 2024 22:55 | Subject: | Re: Missing stickered part from Set 7706 | Viewed: | 26 times | Topic: | Catalog | |
| In Catalog, Saitobricks.ca writes:
| In Catalog, TakeAbricK writes:
| In Catalog Requests, TheJerminator writes:
| I notice that the current inventory for Set 7706-1 Mobile Defense Tank is missing
the two white 2x2 round bricks with stickers from the sides of the vehicle. It
looks like the part does not currently have a catalog entry, either.
The stickers are applied on Page 31 of the instruction manual (Sticker 16, Step
22.3). I cannot add a catalog entry for these stickered parts myself because
I don't own the set or stickered parts.
|
Unortunately there's nothing a catalog admin can do about that. We just have
to wait untill someone who does own the stickered parts, to submit them to the
catalog and add them to the set inventory.
So I will move this post from Topic 'Catalog Request' to Topic 'Catalog'.
Diana
|
I am currently embarking on a journey to catalog all the stickered parts in my
collection, which should take about another year and a half.
|
a worthy goal!
|
|
Author: | Saitobricks.ca | Posted: | May 3, 2024 22:46 | Subject: | Re: Missing stickered part from Set 7706 | Viewed: | 25 times | Topic: | Catalog | |
| In Catalog, TakeAbricK writes:
| In Catalog Requests, TheJerminator writes:
| I notice that the current inventory for Set 7706-1 Mobile Defense Tank is missing
the two white 2x2 round bricks with stickers from the sides of the vehicle. It
looks like the part does not currently have a catalog entry, either.
The stickers are applied on Page 31 of the instruction manual (Sticker 16, Step
22.3). I cannot add a catalog entry for these stickered parts myself because
I don't own the set or stickered parts.
|
Unortunately there's nothing a catalog admin can do about that. We just have
to wait untill someone who does own the stickered parts, to submit them to the
catalog and add them to the set inventory.
So I will move this post from Topic 'Catalog Request' to Topic 'Catalog'.
Diana
|
I am currently embarking on a journey to catalog all the stickered parts in my
collection, which should take about another year and a half.
|
|
Author: | TakeAbricK | Posted: | May 3, 2024 22:44 | Subject: | Re: Missing stickered part from Set 7706 | Viewed: | 38 times | Topic: | Catalog | |
| In Catalog Requests, TheJerminator writes:
| I notice that the current inventory for Set 7706-1 Mobile Defense Tank is missing
the two white 2x2 round bricks with stickers from the sides of the vehicle. It
looks like the part does not currently have a catalog entry, either.
The stickers are applied on Page 31 of the instruction manual (Sticker 16, Step
22.3). I cannot add a catalog entry for these stickered parts myself because
I don't own the set or stickered parts.
|
Unortunately there's nothing a catalog admin can do about that. We just have
to wait untill someone who does own the stickered parts, to submit them to the
catalog and add them to the set inventory.
So I will move this post from Topic 'Catalog Request' to Topic 'Catalog'.
Diana
|
|
Author: | Nubs_Select | Posted: | May 3, 2024 22:26 | Subject: | Re: Din Grogu set 75378 new PCC | Viewed: | 27 times | Topic: | Catalog | |
| In Catalog, Saitobricks.ca writes:
| In Catalog, Nubs_Select writes:
| In Catalog, axaday writes:
| In Catalog, Nubs_Select writes:
| I'm working on the inventory for set and the body for Din Grogu
has a new PCC. comparing the 2 images I can't tell if its a new pattern or
just printing variation. should I add a new entry or just add the new PCC? In
image 2 I drew arrows pointing to some different areas along with some lines
to show the height difference of the one line
|
There was a precedent (I cannot remember which now) where a torso definitely
looked like someone had redrawn the other. All the same details, but not arranged
and angled the same. And we did not make a new part.
|
interesting, I wonder if that's the case here aswell
|
LEGO made a slight update hoping Nubs would not notice
|
|
|
Author: | Saitobricks.ca | Posted: | May 3, 2024 22:24 | Subject: | Re: Din Grogu set 75378 new PCC | Viewed: | 22 times | Topic: | Catalog | |
| In Catalog, Nubs_Select writes:
| In Catalog, axaday writes:
| In Catalog, Nubs_Select writes:
| I'm working on the inventory for set and the body for Din Grogu
has a new PCC. comparing the 2 images I can't tell if its a new pattern or
just printing variation. should I add a new entry or just add the new PCC? In
image 2 I drew arrows pointing to some different areas along with some lines
to show the height difference of the one line
|
There was a precedent (I cannot remember which now) where a torso definitely
looked like someone had redrawn the other. All the same details, but not arranged
and angled the same. And we did not make a new part.
|
interesting, I wonder if that's the case here aswell
|
LEGO made a slight update hoping Nubs would not notice
|
|
Author: | Nubs_Select | Posted: | May 3, 2024 21:30 | Subject: | Re: Din Grogu set 75378 new PCC | Viewed: | 34 times | Topic: | Catalog | |
| In Catalog, axaday writes:
| In Catalog, Nubs_Select writes:
| I'm working on the inventory for set and the body for Din Grogu
has a new PCC. comparing the 2 images I can't tell if its a new pattern or
just printing variation. should I add a new entry or just add the new PCC? In
image 2 I drew arrows pointing to some different areas along with some lines
to show the height difference of the one line
|
There was a precedent (I cannot remember which now) where a torso definitely
looked like someone had redrawn the other. All the same details, but not arranged
and angled the same. And we did not make a new part.
|
interesting, I wonder if that's the case here aswell
|
|
Author: | axaday | Posted: | May 3, 2024 21:25 | Subject: | Re: Din Grogu set 75378 new PCC | Viewed: | 35 times | Topic: | Catalog | |
| In Catalog, Nubs_Select writes:
| I'm working on the inventory for set and the body for Din Grogu
has a new PCC. comparing the 2 images I can't tell if its a new pattern or
just printing variation. should I add a new entry or just add the new PCC? In
image 2 I drew arrows pointing to some different areas along with some lines
to show the height difference of the one line
|
There was a precedent (I cannot remember which now) where a torso definitely
looked like someone had redrawn the other. All the same details, but not arranged
and angled the same. And we did not make a new part.
|
|
Author: | Nubs_Select | Posted: | May 3, 2024 20:50 | Subject: | Din Grogu set 75378 new PCC | Viewed: | 107 times | Topic: | Catalog | Status: | Open | |
| I'm working on the inventory for set and the body for Din Grogu
has a new PCC. comparing the 2 images I can't tell if its a new pattern or
just printing variation. should I add a new entry or just add the new PCC? In
image 2 I drew arrows pointing to some different areas along with some lines
to show the height difference of the one line
|
|
|
Author: | TheJerminator | Posted: | May 3, 2024 19:31 | Subject: | Missing stickered part from Set 7706 | Viewed: | 83 times | Topic: | Catalog | Status: | Open | |
| I notice that the current inventory for Set 7706-1 Mobile Defense Tank is missing
the two white 2x2 round bricks with stickers from the sides of the vehicle. It
looks like the part does not currently have a catalog entry, either.
The stickers are applied on Page 31 of the instruction manual (Sticker 16, Step
22.3). I cannot add a catalog entry for these stickered parts myself because
I don't own the set or stickered parts.
|
|
Author: | Saitobricks.ca | Posted: | May 3, 2024 13:16 | Subject: | Re: Inventory Change Request for Set 60229-1 | Viewed: | 23 times | Topic: | Catalog | |
| In Catalog Requests, rainbowmist writes:
| In Catalog Requests, rainbowmist writes:
| In Catalog Requests, Saitobricks.ca writes:
| In Catalog Requests, rainbowmist writes:
| Add a stickered part to inventory 60229-1.
Add 2 30413 Dark Blue with Solar Panel Sticker.
Thank you.
|
First you need to add the part to the catalog, then you can make a inventory
change request.
|
Never done this before. How do you add it first?
Thank you.
|
Never mind found where to add to catalog.
|
|
|
Author: | rainbowmist | Posted: | May 3, 2024 13:11 | Subject: | Re: Inventory Change Request for Set 60229-1 | Viewed: | 20 times | Topic: | Catalog | |
| In Catalog Requests, rainbowmist writes:
| In Catalog Requests, Saitobricks.ca writes:
| In Catalog Requests, rainbowmist writes:
| Add a stickered part to inventory 60229-1.
Add 2 30413 Dark Blue with Solar Panel Sticker.
Thank you.
|
First you need to add the part to the catalog, then you can make a inventory
change request.
|
Never done this before. How do you add it first?
Thank you.
|
Never mind found where to add to catalog.
|
|
Author: | rainbowmist | Posted: | May 3, 2024 13:10 | Subject: | Re: Inventory Change Request for Set 60229-1 | Viewed: | 20 times | Topic: | Catalog | |
| In Catalog Requests, Saitobricks.ca writes:
| In Catalog Requests, rainbowmist writes:
| Add a stickered part to inventory 60229-1.
Add 2 30413 Dark Blue with Solar Panel Sticker.
Thank you.
|
First you need to add the part to the catalog, then you can make a inventory
change request.
|
Never done this before. How do you add it first?
Thank you.
|
Author: | Saitobricks.ca | Posted: | May 3, 2024 11:49 | Subject: | Re: Inventory Change Request for Set 60229-1 | Viewed: | 21 times | Topic: | Catalog | |
| In Catalog Requests, rainbowmist writes:
| Add a stickered part to inventory 60229-1.
Add 2 30413 Dark Blue with Solar Panel Sticker.
Thank you.
|
First you need to add the part to the catalog, then you can make a inventory
change request.
|
Author: | Saitobricks.ca | Posted: | May 3, 2024 11:48 | Subject: | Re: Inventory Change Request for Set 60229-1 | Viewed: | 22 times | Topic: | Catalog | |
| In Catalog Requests, rainbowmist writes:
| Add a stickered part to inventory 60229-1.
Add 2 30413 Dark Blue with Solar Panel Sticker.
Thank you.
|
🤦♂️ Knew that was coming.
|
Author: | rainbowmist | Posted: | May 3, 2024 11:45 | Subject: | Inventory Change Request for Set 60229-1 | Viewed: | 30 times | Topic: | Catalog | Status: | Open | |
| Add a stickered part to inventory 60229-1.
Add 2 30413 Dark Blue with Solar Panel Sticker.
Thank you.
|
|
|
Author: | randyf | Posted: | May 1, 2024 16:25 | Subject: | Re: Does part 10202 need a note? | Viewed: | 43 times | Topic: | Catalog | |
| In Catalog, starbeanie writes:
Ah, yes. Thank you. 👍
| In Catalog, randyf writes:
| In Catalog, Ziegelmeister writes:
| Normally I wouldn't think twice about this, but I just packed and shipped
an order for a bunch of tiles ranging from 1x1 to 6x6. If you're not aware
the, the 6x6's have a matte finish quality to them that almost resembles
a 4x3 slope rather than the high gloss you come to expect from, say, 2x6 tiles.
Should there be a note attached to 10202 mentioning this? If this particular
buyer is intending to have these seamlessly blend in with the other tiles they
bought, they're in for a bad surprise unless they are already familiar with
the part.
|
Done.
|
|
|
|
Author: | starbeanie | Posted: | May 1, 2024 09:02 | Subject: | Re: Does part 10202 need a note? | Viewed: | 37 times | Topic: | Catalog | |
| is also matte
In Catalog, randyf writes:
| In Catalog, Ziegelmeister writes:
| Normally I wouldn't think twice about this, but I just packed and shipped
an order for a bunch of tiles ranging from 1x1 to 6x6. If you're not aware
the, the 6x6's have a matte finish quality to them that almost resembles
a 4x3 slope rather than the high gloss you come to expect from, say, 2x6 tiles.
Should there be a note attached to 10202 mentioning this? If this particular
buyer is intending to have these seamlessly blend in with the other tiles they
bought, they're in for a bad surprise unless they are already familiar with
the part.
|
Done.
|
|
|
Author: | randyf | Posted: | Apr 30, 2024 20:52 | Subject: | Re: Does part 10202 need a note? | Viewed: | 42 times | Topic: | Catalog | |
| In Catalog, Ziegelmeister writes:
| In Catalog, randyf writes:
| In Catalog, Dhobeck writes:
| Would part 22385 need this note as well?
|
Also done.
| In Catalog, randyf writes:
| In Catalog, Ziegelmeister writes:
| Normally I wouldn't think twice about this, but I just packed and shipped
an order for a bunch of tiles ranging from 1x1 to 6x6. If you're not aware
the, the 6x6's have a matte finish quality to them that almost resembles
a 4x3 slope rather than the high gloss you come to expect from, say, 2x6 tiles.
Should there be a note attached to 10202 mentioning this? If this particular
buyer is intending to have these seamlessly blend in with the other tiles they
bought, they're in for a bad surprise unless they are already familiar with
the part.
|
Done.
|
|
|
Hopefully I didn't open a can of worms with this.
|
Oh, no. These are good notes to have on these two parts. I am glad you suggested
it, because they do affect how a build looks.
Even the LEGO Group themselves redesigned
because of so many complaints about the matte finish 6x6 tile originally used
for the roof in the set not matching all of the other glossy tile work on the
rest of the vehicle.
| I've got a bunch of
22385 in different colors and I've only seen this with the 10202. It was
enough to make me pull out the magnifying glass to make sure it was the right
part number and had a LEGO logo.
|
|
|
Author: | Ziegelmeister | Posted: | Apr 30, 2024 19:05 | Subject: | Re: Does part 10202 need a note? | Viewed: | 34 times | Topic: | Catalog | |
| In Catalog, randyf writes:
| In Catalog, Dhobeck writes:
| Would part 22385 need this note as well?
|
Also done.
| In Catalog, randyf writes:
| In Catalog, Ziegelmeister writes:
| Normally I wouldn't think twice about this, but I just packed and shipped
an order for a bunch of tiles ranging from 1x1 to 6x6. If you're not aware
the, the 6x6's have a matte finish quality to them that almost resembles
a 4x3 slope rather than the high gloss you come to expect from, say, 2x6 tiles.
Should there be a note attached to 10202 mentioning this? If this particular
buyer is intending to have these seamlessly blend in with the other tiles they
bought, they're in for a bad surprise unless they are already familiar with
the part.
|
Done.
|
|
|
Hopefully I didn't open a can of worms with this. I've got a bunch of
22385 in different colors and I've only seen this with the 10202. It was
enough to make me pull out the magnifying glass to make sure it was the right
part number and had a LEGO logo.
|
|
Author: | peregrinator | Posted: | Apr 30, 2024 18:14 | Subject: | Re: Does part 10202 need a note? | Viewed: | 35 times | Topic: | Catalog | |
| In Catalog, randyf writes:
| In Catalog, peregrinator writes:
| In Catalog, Dhobeck writes:
| Would part 22385 need this note as well?
|
Pentagonal tiles have the normal tile finish
|
No, they don't.
|
Thanks for the correction, I always thought they did!
|
Author: | randyf | Posted: | Apr 30, 2024 17:20 | Subject: | Re: Does part 10202 need a note? | Viewed: | 33 times | Topic: | Catalog | |
| In Catalog, peregrinator writes:
| In Catalog, Dhobeck writes:
| Would part 22385 need this note as well?
|
Pentagonal tiles have the normal tile finish
|
No, they don't.
|
|
Author: | randyf | Posted: | Apr 30, 2024 17:20 | Subject: | Re: Does part 10202 need a note? | Viewed: | 33 times | Topic: | Catalog | |
| In Catalog, Dhobeck writes:
| Would part 22385 need this note as well?
|
Also done.
| In Catalog, randyf writes:
| In Catalog, Ziegelmeister writes:
| Normally I wouldn't think twice about this, but I just packed and shipped
an order for a bunch of tiles ranging from 1x1 to 6x6. If you're not aware
the, the 6x6's have a matte finish quality to them that almost resembles
a 4x3 slope rather than the high gloss you come to expect from, say, 2x6 tiles.
Should there be a note attached to 10202 mentioning this? If this particular
buyer is intending to have these seamlessly blend in with the other tiles they
bought, they're in for a bad surprise unless they are already familiar with
the part.
|
Done.
|
|
|
|
Author: | Dhobeck | Posted: | Apr 30, 2024 17:18 | Subject: | Re: Does part 10202 need a note? | Viewed: | 24 times | Topic: | Catalog | |
| In Catalog, peregrinator writes:
| In Catalog, Dhobeck writes:
| Does this one not have the normal tile finish or is it just me
|
That one definitely doesn't appear to have a normal finish
|
Do the ones in your store have a smoother finish?
|
Author: | peregrinator | Posted: | Apr 30, 2024 17:14 | Subject: | Re: Does part 10202 need a note? | Viewed: | 28 times | Topic: | Catalog | |
| In Catalog, Dhobeck writes:
| Does this one not have the normal tile finish or is it just me
|
That one definitely doesn't appear to have a normal finish
|
Author: | Dhobeck | Posted: | Apr 30, 2024 17:11 | Subject: | Re: Does part 10202 need a note? | Viewed: | 27 times | Topic: | Catalog | |
| In Catalog, peregrinator writes:
| In Catalog, Dhobeck writes:
| Would part 22385 need this note as well?
|
Pentagonal tiles have the normal tile finish
|
Does this one not have the normal tile finish or is it just me
|
|
Author: | peregrinator | Posted: | Apr 30, 2024 17:08 | Subject: | Re: Does part 10202 need a note? | Viewed: | 30 times | Topic: | Catalog | |
| In Catalog, Dhobeck writes:
| Would part 22385 need this note as well?
|
Pentagonal tiles have the normal tile finish
|
|
Author: | Dhobeck | Posted: | Apr 30, 2024 16:49 | Subject: | Re: Does part 10202 need a note? | Viewed: | 37 times | Topic: | Catalog | |
| Would part 22385 need this note as well?In Catalog, randyf writes:
| In Catalog, Ziegelmeister writes:
| Normally I wouldn't think twice about this, but I just packed and shipped
an order for a bunch of tiles ranging from 1x1 to 6x6. If you're not aware
the, the 6x6's have a matte finish quality to them that almost resembles
a 4x3 slope rather than the high gloss you come to expect from, say, 2x6 tiles.
Should there be a note attached to 10202 mentioning this? If this particular
buyer is intending to have these seamlessly blend in with the other tiles they
bought, they're in for a bad surprise unless they are already familiar with
the part.
|
Done.
|
|
|
Author: | Ziegelmeister | Posted: | Apr 30, 2024 16:23 | Subject: | Re: Does part 10202 need a note? | Viewed: | 30 times | Topic: | Catalog | |
| In Catalog, randyf writes:
Much appreciated!
|
Author: | randyf | Posted: | Apr 30, 2024 16:20 | Subject: | Re: Does part 10202 need a note? | Viewed: | 35 times | Topic: | Catalog | |
| In Catalog, Ziegelmeister writes:
| Normally I wouldn't think twice about this, but I just packed and shipped
an order for a bunch of tiles ranging from 1x1 to 6x6. If you're not aware
the, the 6x6's have a matte finish quality to them that almost resembles
a 4x3 slope rather than the high gloss you come to expect from, say, 2x6 tiles.
Should there be a note attached to 10202 mentioning this? If this particular
buyer is intending to have these seamlessly blend in with the other tiles they
bought, they're in for a bad surprise unless they are already familiar with
the part.
|
Done.
|
|
Author: | Ziegelmeister | Posted: | Apr 30, 2024 16:01 | Subject: | Does part 10202 need a note? | Viewed: | 125 times | Topic: | Catalog | Status: | Open | |
| Normally I wouldn't think twice about this, but I just packed and shipped
an order for a bunch of tiles ranging from 1x1 to 6x6. If you're not aware
the, the 6x6's have a matte finish quality to them that almost resembles
a 4x3 slope rather than the high gloss you come to expect from, say, 2x6 tiles.
Should there be a note attached to 10202 mentioning this? If this particular
buyer is intending to have these seamlessly blend in with the other tiles they
bought, they're in for a bad surprise unless they are already familiar with
the part.
|
Author: | Nubs_Select | Posted: | Apr 29, 2024 23:15 | Subject: | Re: New part added | Viewed: | 38 times | Topic: | Catalog | |
| Looking good! 🍕🍕 |
Author: | ccroxton | Posted: | Apr 29, 2024 23:10 | Subject: | Re: New part added | Viewed: | 32 times | Topic: | Catalog | |
| In Catalog, randyf writes:
| In Catalog, ccroxton writes:
| Thanks for adding the new part! The set number is in the description, but the
set is not linked, and the part does not appear in the set inventory.
|
You need to fill out an Inventory Change Request to have it added.
Start here: https://www.bricklink.com/catalogInvChange.asp?itemType=S
Cheers,
Randy
|
Thanks Randy and Nubs! Page has been submitted. Hope I did it correctly!
|
|
Author: | randyf | Posted: | Apr 29, 2024 22:24 | Subject: | Re: New part added | Viewed: | 33 times | Topic: | Catalog | |
| In Catalog, ccroxton writes:
| Thanks for adding the new part! The set number is in the description, but the
set is not linked, and the part does not appear in the set inventory.
|
You need to fill out an Inventory Change Request to have it added.
Start here: https://www.bricklink.com/catalogInvChange.asp?itemType=S
Cheers,
Randy
|
Author: | ccroxton | Posted: | Apr 29, 2024 22:22 | Subject: | New part added | Viewed: | 82 times | Topic: | Catalog | Status: | Open | |
| Thanks for adding the new part! The set number is in the description, but the
set is not linked, and the part does not appear in the set inventory.
|
|
Author: | razorflan | Posted: | Apr 29, 2024 21:47 | Subject: | Re: Adding a part to the catalog | Viewed: | 27 times | Topic: | Catalog | |
| In Catalog, razorflan writes:
| In Catalog Requests, razorflan writes:
| I want to add this sticker part to the inventory of set 70813 rescue re-enforcements.
I want to contribute to the catalog but just find it too complicated to understand.
For some reason the image here has loaded sideways and need's to be rotated
to the right. The next available part number is 892pb039
|
From homepage I select catalog/add or change ... then add item/part ... am
I even in the right area to add a new counterpart or image. I would like a couple
of pointers to be able to do this myself.. thanks
|
First 3 entry's are :1 catalog ... erm : roadsign / 2 item no... 892. And
3 : item name "road sign 2x2 triangle with clip with warning sign with "black
flame" on yellow background pattern (sticker) set 70813
Got the year (2014), weight (0.03g), stud dim. (2×2) pack dim / pack dim... got
that too.
When does it ask for next available part no. (892pb039)
If I can cracking the first 3 entry's maybee I can move forward... maybee
|
|
Author: | randyf | Posted: | Apr 29, 2024 00:33 | Subject: | Re: Technic Turntable 60T Redesign - 88738 | Viewed: | 50 times | Topic: | Catalog | |
| In Catalog Requests, Rayque writes:
| Hi all,
The 2015 Technic Turntable with 60 teeth (Part #18938) has been replaced by its
redesign, Part #88738.
https://www.bricklink.com/v2/catalog/catalogitem.page?P=18938#T=P
Currently, #88738 is listed as an Alternate Item No for #18938. However, I own
both versions and they are not quite the same. I've attached several images
to this message to show the difference.
Part #18938 has bevel teeth, whereas the redesigned turntable #88738 has straight
teeth. Another way to tell these two apart are the amount of snap-fit joints:
the newer turntable has six of them, whereas the older one only has four.
The main reason why I request to split #88738 from #18938 is because #88738 is
functionally different from its predecessor.
#18938 has bevel teeth, meaning that other bevel gears can be used perpendicular
to it. However, because of the wider teeth, this turntable is incompatible with
Technic chain links (#3711, #3249 and #3873), which only fit spur gears.
#88738 has the same teeth width as other Technic spur gears, which matches the
older 56 teeth turntables (#2855 and #48168). This means that the newer turntable
is compatible with Technic chain links, but has lost the bevel teeth in the process.
As for the exact year when #88738 was introduced, it is probably 2022?
- I've checked my 2020 copy of #51515 (Robot Inventor), and it contains #18938.
- Looking at reviews of 2021's #75313 (UCS AT-AT), it also contains #18938.
- Reviews of 2022's #76210 (Hulkbuster) shows #88738.
- Reviews of 2023 sets, such as #42158 (NASA Mars Rover Perseverance) and #75362
(Ahsoka Tano's T-6 Jedi Shuttle), shows that these sets also include #88738.
How I got my hands on #88738 was through buying these from LEGO's online
Pick a Brick last week, in research of this topic. They no longer have #18938
for sale, which implies it is out of production.
As a normal Bricklink user, I cannot request to add part #88738 to the catalog,
because it is listed as the Alternate Item No for #18938. If possible, I would
prefer #88738 to have its own entry in the catalog because it is functionally
different enough to justify it. I'll leave it to our admins to decide.
Thank you in advance and for reading this.
|
This has been completed.
-----
has been replaced by
and
-----
has been replaced by
and
-----
* | | 18939c02 Technic Turntable 60 Tooth with Dark Bluish Gray Top (18939 / 18938u) (Undetermined Type) Parts: Technic Marked for Deletion |
has been replaced by
* | | 18939c04 (Inv) Technic Turntable 60 Tooth with Dark Bluish Gray Top with Beveled Teeth (18939 / 18938) Parts: Technic |
and
* | | 18939c05 (Inv) Technic Turntable 60 Tooth with Dark Bluish Gray Top with Straight Teeth (18939 / 88738) Parts: Technic |
-----
The set inventories are currently in the process of being updated.
Cheers,
Randy
|
|
Author: | zorbanj | Posted: | Apr 28, 2024 18:49 | Subject: | Re: Set 41442 | Viewed: | 40 times | Topic: | Catalog | |
| In Catalog, randyf writes:
| In Catalog, zorbanj writes:
Because no one has submitted an Inventory Change Request to have them added.
|
Just submitted it.
|
Author: | randyf | Posted: | Apr 28, 2024 17:12 | Subject: | Re: Set 41442 | Viewed: | 49 times | Topic: | Catalog | |
| In Catalog, zorbanj writes:
Because no one has submitted an Inventory Change Request to have them added.
|
Author: | Turez | Posted: | Apr 28, 2024 04:26 | Subject: | Re: Adding a part to the catalog | Viewed: | 33 times | Topic: | Catalog | |
| In Catalog Requests, razorflan writes:
| I want to add this sticker part to the inventory of set 70813 rescue re-enforcements.
I want to contribute to the catalog but just find it too complicated to understand.
For some reason the image here has loaded sideways and need's to be rotated
to the right. The next available part number is 892pb039
|
See https://www.bricklink.com/message.asp?ID=1432363
|
|
Author: | Dhobeck | Posted: | Apr 27, 2024 19:27 | Subject: | Re: Adding a part to the catalog | Viewed: | 32 times | Topic: | Catalog | |
| In Catalog Requests, kittybrickz writes:
| |
series 26 space. they wont be added to the catalogue tho until the official release
date. (the penguin looks pretty cool tho!)
|
crap! I was hoping to get a head start on sales haha
I really like #7, the black space body is killer! Oh and I love the Orion shield
for the purple one!
|
My favorite is the bubblegum ice cream space baby
|
Author: | Nubs_Select | Posted: | Apr 27, 2024 19:06 | Subject: | Re: Adding a part to the catalog | Viewed: | 31 times | Topic: | Catalog | |
| they do look pretty cool! |
Author: | kittybrickz | Posted: | Apr 27, 2024 19:00 | Subject: | Re: Adding a part to the catalog | Viewed: | 33 times | Topic: | Catalog | |
| |
series 26 space. they wont be added to the catalogue tho until the official release
date. (the penguin looks pretty cool tho!)
|
crap! I was hoping to get a head start on sales haha
I really like #7, the black space body is killer! Oh and I love the Orion shield
for the purple one!
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|